smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.24-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 7200.4
Device Model:     ST9250410AS
Serial Number:    5VG6JLSX
LU WWN Device Id: 5 000c50 0298def9c
Firmware Version: 0006HPM1
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Oct  9 19:59:42 2016 +08
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  52) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   099   006    Pre-fail  Always       -       110583488
  3 Spin_Up_Time            0x0002   099   099   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0033   100   100   000    Pre-fail  Always       -       793
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       56277367678
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       21817
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0033   100   037   020    Pre-fail  Always       -       781
183 Runtime_Bad_Block       0x0032   100   253   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   098   098   000    Old_age   Always       -       2
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   030   045    Old_age   Always   In_the_past 41 (Min/Max 40/46 #25)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       113
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       42
193 Load_Cycle_Count        0x0032   038   038   000    Old_age   Always       -       125829
194 Temperature_Celsius     0x0022   041   070   000    Old_age   Always       -       41 (0 15 0 0 0)
195 Hardware_ECC_Recovered  0x001a   042   038   000    Old_age   Always       -       110583488
196 Reallocated_Event_Count 0x0033   100   100   036    Pre-fail  Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 14224 hours (592 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d8 21 84 0d  Error: WP at LBA = 0x0d8421d8 = 226763224

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 30 18 3d ba 4d 00      17:27:14.031  WRITE FPDMA QUEUED
  61 00 08 48 36 00 40 00      17:27:14.030  WRITE FPDMA QUEUED
  61 00 18 80 d8 5f 40 00      17:27:14.029  WRITE FPDMA QUEUED
  61 00 08 58 28 9e 41 00      17:27:14.028  WRITE FPDMA QUEUED
  61 00 30 38 3c ba 4d 00      17:27:14.027  WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 14224 hours (592 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d8 21 84 0d  Error: UNC at LBA = 0x0d8421d8 = 226763224

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 e8 48 7e 4d 00      17:27:08.709  READ FPDMA QUEUED
  60 00 18 d0 21 84 4d 00      17:27:08.697  READ FPDMA QUEUED
  60 00 08 f8 39 a3 4d 00      17:27:08.694  READ FPDMA QUEUED
  60 00 10 80 82 84 4d 00      17:27:08.692  READ FPDMA QUEUED
  60 00 08 50 20 84 4d 00      17:27:08.686  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     20773         -
# 2  Short offline       Aborted by host               90%     20746         -
# 3  Short offline       Aborted by host               90%     19059         -
# 4  Short offline       Aborted by host               80%     19059         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.