smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.24-1-MANJARO] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.4 Device Model: ST9250410AS Serial Number: 5VG6JLSX LU WWN Device Id: 5 000c50 0298def9c Firmware Version: 0006HPM1 User Capacity: 250 059 350 016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Oct 9 19:59:42 2016 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 52) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 110583488 3 Spin_Up_Time 0x0002 099 099 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 000 Pre-fail Always - 793 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 56277367678 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21817 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 037 020 Pre-fail Always - 781 183 Runtime_Bad_Block 0x0032 100 253 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 059 030 045 Old_age Always In_the_past 41 (Min/Max 40/46 #25) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 113 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 42 193 Load_Cycle_Count 0x0032 038 038 000 Old_age Always - 125829 194 Temperature_Celsius 0x0022 041 070 000 Old_age Always - 41 (0 15 0 0 0) 195 Hardware_ECC_Recovered 0x001a 042 038 000 Old_age Always - 110583488 196 Reallocated_Event_Count 0x0033 100 100 036 Pre-fail Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 14224 hours (592 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d8 21 84 0d Error: WP at LBA = 0x0d8421d8 = 226763224 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 30 18 3d ba 4d 00 17:27:14.031 WRITE FPDMA QUEUED 61 00 08 48 36 00 40 00 17:27:14.030 WRITE FPDMA QUEUED 61 00 18 80 d8 5f 40 00 17:27:14.029 WRITE FPDMA QUEUED 61 00 08 58 28 9e 41 00 17:27:14.028 WRITE FPDMA QUEUED 61 00 30 38 3c ba 4d 00 17:27:14.027 WRITE FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 14224 hours (592 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d8 21 84 0d Error: UNC at LBA = 0x0d8421d8 = 226763224 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 e8 48 7e 4d 00 17:27:08.709 READ FPDMA QUEUED 60 00 18 d0 21 84 4d 00 17:27:08.697 READ FPDMA QUEUED 60 00 08 f8 39 a3 4d 00 17:27:08.694 READ FPDMA QUEUED 60 00 10 80 82 84 4d 00 17:27:08.692 READ FPDMA QUEUED 60 00 08 50 20 84 4d 00 17:27:08.686 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20773 - # 2 Short offline Aborted by host 90% 20746 - # 3 Short offline Aborted by host 90% 19059 - # 4 Short offline Aborted by host 80% 19059 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
SMART диска ноутбука